Modification temperature is one of the core process parameters in kaolin surface treatment with titanate or silane coupling agents. Based on kaolin processing technology from kaolin-mill.com, temperature directly affects coupling agent hydrolysis, grafting reaction, powder dispersion, and the final physical and chemical properties of modified kaolin.
1. Low temperature: insufficient reaction and low modification degree
At too low mixing temperature (generally below 80 °C for titanate modification), the molecular mobility of coupling agents is weak. The contact probability between titanate molecules and kaolin surface hydroxyl groups decreases.
- The coupling agent tends to be only physically adsorbed rather than chemically bonded onto kaolin surfaces.
- The activation index is low, hydrophobicity is poor, and powder agglomeration remains obvious.
- When filled into polymers, the interfacial bonding is weak, leading to poor dispersion and reduced mechanical performance of composites.
- Shortcoming: Unreacted free titanate easily separates during compounding, causing grease blooming on product surfaces.
2. Optimal temperature range: stable grafting and excellent comprehensive properties
For dry surface modification of kaolin with titanate coupling agents, the typical optimal temperature range is 80–120 °C.
- Moderate heat removes free surface moisture on kaolin particles. Excess water will trigger premature hydrolysis of titanate before it reacts with kaolin hydroxyl groups.
- The titanate alkoxy groups fully react with Si‑OH and Al‑OH on kaolin, forming stable Ti‑O‑Al / Ti‑O‑Si chemical bonds. A uniform organic monomolecular layer forms on the kaolin surface.
- Modified kaolin shows high activation index, good hydrophobicity, low agglomeration, and excellent dispersion in non‑polar or weak‑polar resins.
- Composite materials gain improved tensile strength, impact resistance and lower melt viscosity, allowing higher kaolin filling loading.
3. Excessively high temperature: coupling agent decomposition and powder performance degradation
When modification temperature exceeds 130–150 °C (varies by titanate type), adverse effects appear rapidly.
- Thermal decomposition of titanate coupling agents occurs. Long organic chains break down and lose their interfacial bridging function.
- The organic coating layer may partially carbonize. The surface of kaolin loses hydrophobicity, and activation index drops sharply.
- High temperature may also cause dehydroxylation of kaolin surface groups. The number of active hydroxyl sites for grafting reduces, further weakening modification efficiency.
- Severe overheating may induce secondary agglomeration of ultrafine kaolin particles, increasing particle size and reducing specific surface area.
- In final products, high-temperature damaged kaolin filler causes unstable melt flow and defects such as spots in plastics and coatings.
4. Indirect influences on downstream application properties
- Particle size distribution: Proper temperature helps break soft agglomerates during high-speed mixing; overheating causes re‑agglomeration.
- Oil absorption value: Within the optimal temperature window, oil absorption of modified kaolin is reduced, which is beneficial for lowering resin consumption in plastics and coatings.
- Storage stability: Kaolin modified at the correct temperature has stable hydrophobicity during long-term storage. Underheated samples degrade easily with moisture absorption.
Practical production control notes
- Pre-drying of kaolin is critical before modification to control residual moisture, which works together with temperature to protect titanate from premature hydrolysis.
- Heating duration must match temperature. Higher temperature requires shorter holding time to avoid thermal decomposition.
- Different coupling agents need different temperature settings: titanate usually uses lower modification temperature than many silane coupling agents.
Modification temperature controls the grafting reaction efficiency between coupling agents and kaolin surface hydroxyl groups. Too low temperature results in incomplete coating and poor hydrophobicity. Within the suitable temperature range, titanate can form stable chemical bonding on kaolin, delivering good dispersion and composite reinforcement performance. Excessively high temperature decomposes titanate and destroys kaolin surface active sites, lowering modification quality. For industrial kaolin modification lines, temperature must be strictly controlled together with powder moisture, mixing speed and coupling agent dosage.